# Guides - [Use the GUI to Control Parameters](https://khalil-lab.gitbook.io/evolver/guides/use-the-gui-to-control-parameters.md): A guide for usage of the eVOLVER GUI to set parameters - [Building a Smart Sleeve](https://khalil-lab.gitbook.io/evolver/guides/building-a-smart-sleeve.md): A guide for building Smart Sleeves on eVOLVER - [Making media bottles and splitters](https://khalil-lab.gitbook.io/evolver/guides/making-media-bottles-and-splitters.md): For routing media from standard lab glassware - [Emergency Efflux](https://khalil-lab.gitbook.io/evolver/guides/emergency-efflux.md) - [Soldering Basics](https://khalil-lab.gitbook.io/evolver/guides/soldering-basics.md) - [View the Server Log and Restart Server](https://khalil-lab.gitbook.io/evolver/guides/view-the-server-log-and-restart-server.md) - [Updating the eVOLVER Server](https://khalil-lab.gitbook.io/evolver/guides/updating-the-evolver-server.md): Process for updating code on the eVOLVER Server (Raspberry Pi) - [Change Your conf.yml File](https://khalil-lab.gitbook.io/evolver/guides/change-your-conf.yml-file.md) - [Arduino Software Installation](https://khalil-lab.gitbook.io/evolver/guides/arduino-software-installation.md): Process for installing the Arduino IDE and necessary eVOLVER Arduino libraries. - [Raspberry Pi Configuration](https://khalil-lab.gitbook.io/evolver/guides/raspberry-pi-configuration.md): Process for configuring a Raspberry Pi for eVOLVER - [Command Line Usage](https://khalil-lab.gitbook.io/evolver/guides/command-line-usage.md): A guide to basic command line terminal usage on a UNIX based machine. - [Millifluidics Guides](https://khalil-lab.gitbook.io/evolver/guides/millifluidics-guides.md) - [Designing Millifluidics Using Eagle](https://khalil-lab.gitbook.io/evolver/guides/millifluidics-guides/designing-millifluidics-using-eagle.md) - [Constructing Laser Cut Millifluidics](https://khalil-lab.gitbook.io/evolver/guides/millifluidics-guides/constructing-laser-cut-millifluidics.md) - [Constructing Millifluidics via SLA Printing](https://khalil-lab.gitbook.io/evolver/guides/millifluidics-guides/constructing-millifluidics-via-sla-printing.md) - [Calibrating IPPs](https://khalil-lab.gitbook.io/evolver/guides/millifluidics-guides/calibrating-ipps.md) - [Operating Millifluidics](https://khalil-lab.gitbook.io/evolver/guides/millifluidics-guides/operating-millifluidics.md) --- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://khalil-lab.gitbook.io/evolver/guides.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.