We use supervisor
to run and manage the logs for the eVOLVER server. eVOLVERs should come pre-configured with this.
We also provide a utility monitoring and restart script, evolvercron
and server_monitor.sh
. To use, add the crontab job line in evolvercron
into your cron installation.
Connect to your server via the following command (replace <eVOLVER_IP>
with your eVOLVER's IP)
ssh pi@<eVOLVER_IP>
Enter the eVOLVER server's password
Enter the supervisor environment via the following command:
sudo supervisorctl
Use the following command to follow the eVOLVER server log:
tail -f evolver
To understand what you see in the server log, take a look at the information here.
If you are currently following the eVOLVER server in supervisorctl
, use ctrl+C
to exit. Otherwise, follow steps 1-3 in the above guide.
Enter the following command:
restart evolver
If you quickly follow the server via tail -f evolver
you should see it restart